Professional IP Radio System “Voice Packet Transceiver” Portable type MPT-200, MPT-H1
Takes the user-friendliness of the Mobile type MPT-100 and adds portability. The MPT-H1 has improved water-proof and dust-proof functions, with built-in GPS and a compact body. It works better than ever in various conditions such as disaster scenes and construction sites.
Top Page > Professional IP Radio System -Voice Packet Transceiver- > Portable type MPT-200, MPT-H1
Professional IP Radio System “Voice Packet Transceiver” Portable type MPT-H1
- Secure Water-proof, Dust-proof performance IP67
- *1 : IP6X – Protected from dust (dia.75µm).
*2 : IPX7 – Immersing in water will have no harmful effect. - Built-in GPS
- Since the portable type has both a battery and GPS inside its body, it can monitor location even if it’s not connected to power.
- Light compact body
- Palm-sized W54 x D30 x H123mm, (Projections not included), approx. 240g with battery.
- Long-lasting battery
- Works approx. 9 hours in normal mode and approx. 13 hours in power saving mode.
- Rechargeable with micro USB port
- The device is rechargeable with a general micro USB via a computer or other power source. It doesn’t need a charging cable.
MPT-H1 Standard package/GPS package
It allows you to have a long calls and charge at the same time using the USB connector which is on the bottom of its body.
Because the battery pack contains a large lithium-ion battery, it can make long calls and is useful in cases of electric power loss.
Spare battery packs can be used easily. Battery packs are sold separately.
-Standard package contents-
- MPT-H1 main body
- 3G antenna
- Charger
- Battery pack
- Rear cover
- AC adapter
- Belt clip
- Screws
-GPS Package contents-
- Standard package
- Location management software
MPT-H1 Specifications
| Power supply voltage | Power supply from charger | DC5.5V (Maximum current : 2A) |
|---|---|---|
| Power supply from USB | DC5.0V (Maximum current : 500mA) | |
| Attached battery pack | 3.8V 2,420mAh | |
| Power consumption | Sending / Receiving | 350mA (Max 500mA) |
| Standby | 260mA | |
| Uptime | Normal mode | Approx. 9 hours (Receiving: 1 Sending 1: Standby 8) |
| Power saving mode | Approx. 13hours (Same as above) | |
| Charge time | Approx. 180 min (Power off, using charger) | |
| Dimensions | 54 (W) x 30 (D) x 123 (H) mm (Projections not included) | |
| Weight | Approx. 240g (Battery pack loaded) | |
| Environmental | Operating temperature | -20°C – 60°C |
| Charging | 0°C – 45°C | |
| Water-proof and dust-proof | Equivalent to IP67 | |
| GPS | Yes | |
| Communication methods | 3G / HSPA (800 / 2,100MHz) | |
|---|---|---|
| Transmission output | Max 0.25W | |
| Transmission rate (Max) | Receiving | 14.4Mbps (HSUPA) / 384kbps (W-CDMA) |
| Sending | 5.7Mbps (HSUPA) / 384kbps (W-CDMA) | |
| Speaker power output | 2 systems | Main speaker 1W |
| Ear receiver 0.01W | ||
MPT-H1 Products sold separately
MPT-H1 Main body
The main body of the MPT-H1 is sold separately in case of trouble.
Battery pack
If you feel the battery doesn’t last as long as before, it’s time to change it. Please feel free to contact us about supplies.
Charger
A charger for the MPT-H1. AC adapter included.
3G antenna
The antenna to connect to the upper part of the main body.
Belt clip
Attach the belt clip to the main body for carrying.
MPT-H1 Optional products
Remote microphone
Water-proof, Dust-proof, Supports IP67
Make calls with the PTT button. No need to operate the main body.
Earphone (Type 1)
Water-proof, Dust-proof, Supports IP54
Useful in noisy places or when you don’t want others to hear the voice of the caller.
Earphone (Type 2)
Water-proof, Dust-proof, Supports IP54
Useful in noisy places or when you don’t want others to hear the voice of the caller.
Soft carry case
A soft case for the MPT-H1. Protects the main body from impact. Good for outside use. Chargeable from USB even when the soft case is attached.
Shoulder strap
The strap used when carrying the MPT-H1 in a soft carry case. Please attach it to the hooks on the soft carry case.
